Waterproofing Chemicals

Description:

Tuffcrete is an 'acrylic copolymer emulsion' based additive for cement based coatings, mortar and screed to enhance its water proofing and mechanical properties such as adhesion, flexural, tensile, compressive and impact strength.

• As water Proofing coating, Tuffcrete is suitable for water proofing of terraces, roofs, toilets, watertanks, swimming pools basements etc.
• As repair mortar, Tuffcrete is used for repairing of concrete and masonary works, for protection of concrete against corrosion, salt attacks etc.
• As additive for cement paints, Tuffcrete is used as an additive for cement paints to improve water proofing properties and increase the durability.

• Coating of Tuffcrete mixed with cement gives excellent water proofing properties to the substrate.
• Tuffcrete provides excellent adhesion to concrete substrate, steel, asbestos etc.
• Excellent resistance to UV rays.
• Excellent breathing properties.
• Helps in reducing fungal and micro organism attack.
• Helps in reducing corrosion of the reinforcement.
• Environment friendly, non-toxic, non-flammable and resistant to weathering effect.
• Tuffcrete coating can be used for applications involving continuous contact with water.

Description:
Conpro WP -2 is cement based two component modified acrylic copolymer emulsion, Conpro WP -2 provide waterproofing coating, capable of resisting ground and back water seepage at negative pressure.

High flexibility enable it to bridge hairline cracks.

Uses :
Conpro WP-2 is used for

• External and internal water proofing of structures like basements, terraces, balconies, swimming pools, bathrooms, storage water tanks, etc.
• Bridging of cracks
• Waterproofing repair of all the above structures.

• Very easy to apply (By brush or roller)


• Excellent adhesion with cement bound surface (plaster, concrete etc.)
• Vapour permeable (Breathing active)
• Non toxic
• Can withstand pressure equivalent to 30m. waterhead
• Good abrasion resistance
• Carbonation resistance
• UV resistant
• Highly flexible.

Description:

Conpro IW-302 is normal setting, integral cement waterproofing compound that makes concrete resist water through hydrostatic pressure or capillary action.

Conpro IW -302 complies with IS 2645-1975.

Uses:
Conpro IW-302 is used for waterproofing of concrete and mortar in :

• Roofs, terraces, balconies


• Water tanks, swimming pools, silos etc.
• Basements, toilets
• Areas exposed to water/moisture etc.

• Reduces permeability of concrete to a large extent.
• Arrests saltpetre/efflorescence action


• Prevents bleeding and segregation.
• Allows normal breathing of concrete/mortar.
• Improves workability of concrete.
• Reduces W/C ratio.


• Prevents corrosion of steel reinforcement.
• Chloride free.

Description :

Conpro SB-4 is a special styrene butadiene copolymer emulsion based additive for concrete and mortar to increase adhesion strength, water resistance, chemical resistance and abrasion resistance.

• Bonding of old concrete to new concrete
• Water proofing coating
• Plaster work on difficult surfaces
• Levelling & repair mortar
• Jointing & bonding of common masonary works
• Crack filling of roofs, terraces, walls etc.
• In lime & cement paints to improve bonding and water resistance
• Cement mortar for improved chemical resistance.

• Increases the bond strength of cementitious mortar & concrete by more than 5 times.
• Decreases water permeability of cementitious mortar, concrete & coatings.
• Improves chemical resistance


• Increases flexural, tensile strength and elasticity.

Description :

Conpro RC is a high build, ready to use, anti-corrosive and water proofing coating. It is based on Coaltar and Synthetic rubber. Conpro RC cures to a tough elastic film which is water proof and has good resistance to many corrosive chemicals. It has excellent bond with concrete, mild steel and most of other building materials.

• Conpro RC is used as protective coating for mild steel and pipelines.
• Conpro RC highly suitable for water proofing of basements, water tanks, swimming pools.
• Conpro RC is used for water proofing of roofs, terraces, chajjas, parapet walls, sunken slabs etc.

Description :

CONPRO CT-3 is a high build, two component, anticorrosive and water proofing coating. It is based on Coaltar, Epoxy resin and specially formulated hardner CONPRO CT-3 cures to a tough elastic film which is water proof and has good resistance to many corrosive chemicals. It has excellent bond with concrete, mild steel and most of other building materials.

• CONPRO CT-3 is used as protective coating for mild steel and RCC substrates subjected to water immersion, exposed to marine environment or sub soil condition.
• CONPRO CT-3 highly suitable for water proofing of roofs & basement.
• CONPRO CT-3 is ideal for protection of under water or sub-soil structures and pipeline, waste water and sewage treatment plants.

Apply mixed CONPRO CT-3 over preapared substrate by brash, roller or airless spray. Second coat should be applied after minimum 12 hours.